Dsu Bandwidth - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

dsu bandwidth

dsu bandwidth bandwidthValue
Syntax
no dsu bandwidth
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the speed for the fractional T3 lines. The no version clears the bandwidth. If
Description
you issue this command, be sure to issue the dsu mode and scramblecommands.
Similarly, if you issue the no version, be sure to issue the no versions of the dsu
mode and scramble commands; otherwise, the interface may drop packets
unexpectedly.
Options
Controller Configuration
Mode
bandwidthValue Value of the fractional bandwidth in the range 22–44210 Kbps.
The router offers a set of speeds in increments that depend on the DSU mode
you specify. The actual speed of the fractional T3 lines will be the value closest
to the fractional bandwidth you specify.
Chapter 5: D Commands
549
dsu bandwidth