Area Virtual-Link Message-Digest-Key Md5 - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

area virtual-link message-digest-key md5

area { areaId | areaIdInt } virtual-link ipAddress
Syntax
message-digest-key md5KeyId md5 [ 0 | 8 ] msgDigestKey
no area { areaId | areaIdInt } virtual-link ipAddress message-digest-key md5KeyId
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables MD5 authentication and configures MD5 keys for virtual links. The no version
Description
deletes MD5 keys.
NOTE: If you delete all the MD5 keys, the authentication type for the virtual link is
still MD5, but you need to configure MD5 keys.
To disable MD5 authentication for the virtual link, use the area virtual-link
authentication-none command.
Options
Router Configuration
Mode
areaId OSPF area ID in IP address format
areaIdInt OSPF area ID as a decimal value in the range 0–4294967295
ipAddress IP address of the virtual link neighbor
md5KeyId Key identifier in the range 1–255
0 Indicates the msgDigestKey is entered in unencrypted form (plaintext); this
is the default option
8 Indicates the msgDigestKey is entered in encrypted form (ciphertext)
msgDigestKey Password to be used by neighbors; string of up to 16 alphanumeric
characters. All neighboring routers on the same network must have the same
password.
Chapter 2: A Commands
area virtual-link message-digest-key md5
139