Authentication-Key - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

authentication-key

authentication-key [ 0 | 8 ] authKey
Syntax
no authentication-key
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables simple password authentication and assigns a password used by OSPF
Description
remote neighbors. The no version deletes the password.
Options
Remote Neighbor Configuration
Mode
196
authentication-key
0 Indicates the authKey is entered in unencrypted form (plaintext); this is the
default option
8 Indicates the authKey is entered in encrypted form (ciphertext)
authKey Password; string of up to 8 characters