Aaa Domain-Map - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

aaa domain-map

aaa domain-map domainName
Syntax
[ routerName [ loopback interfaceNumber | ipAddress ipMask ] ]
no aaa domain-map domainName
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipAddress and ipMask variables added in JUNOSe Release 9.0.0.
Maps a user domain name to a virtual router. When you specify only the domain
Description
name, the command sets the mode to Domain Map Configuration. The no version
deletes the map entry.
Options
Global Configuration
Mode
42
aaa domain-map
domainName User domain name; specify the domain name none to assign users
without domains to a specific virtual router.
routerName Router name associated with the domain name
loopback Specifies the loopback interface
interfaceNumber Interface number in the range 0–32000
ipAddress—IP address of the local interface
ipMask IPv4 address mask of the local interface