Ip Classifier-List - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ip classifier-list

ip classifier-list classifierName [ traffic-class trafficClassName ]
Syntax
[ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ]
[ source-route-class routeClassValue ] [destination-route-class routeClassValue ]
[ local { true | false } ] [ not ] { protocol }
[ not ] { sourceAddress sourceMask | host sourceHostAddress | any }
[ sourceQualifier ]
[ not ] { destinationAddress destinationMask | host destinationHostAddress | any }
[ destinationQualifier ] [ tcpQualifier ] [ ip-flags ipFlags ]
[ ip-frag-offset { eq 0 | eq 1 | gt 1 } ]
[ precedence precNum | dsField dsFieldNum | tos tosNum ]
no ip classifier-list classifierName [ classifierNumber ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates or modifies a classifier control list. Use the not keyword to deny traffic for
Description
a specific protocol, source address, or destination address. Use the any keyword to
allow traffic to any source or destination address. The no version removes the
classifier control list.
Options
736
ip classifier-list
classifierName Name of the classifier control list entry
trafficClassName Name of the traffic class to match
green Matches packet color to green, indicating a low drop preference
yellow Matches packet color to yellow, indicating a medium drop preference
red Matches packet color to red, indicating a high drop preference
userPacketClassValue User packet value to match; in the range 0–15
routeClassValue Value of the route-class; in the range 0–255
local Specifies traffic destined for this interface
true Matches packets that are locally destined
false Matches packets that are not locally destined
not Matches any except the immediately following protocol or address
protocol Protocol name (IGMP, IP, TCP, or UDP) or number (in the range 0–255)
to match
sourceAddress Source address to match
sourceMask Wild-card mask to apply to the source address
host Matches source or destination address as a host
sourceHostAddress—Source host address to match
any Matches any source or destination address