Ip Igmp-Proxy V1-Router-Present-Time - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

ip igmp-proxy V1-router-present-time

ip igmp-proxy V1-router-present-time seconds
Syntax
no ip igmp-proxy V1-router-present-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies how long the router assumes that there is an IGMPv1 querier router on the
Description
subnet after the router receives an IGMP V1 query on this interface. The no version
restores the default value, 10 seconds.
Options
Interface Configuration
Mode
seconds Time for which the router assumes that there is an IGMPv1 querier
router on the subnet after the router receives an IGMP V1 query on this interface
Chapter 10: I Commands
ip igmp-proxy V1-router-present-time
811