Address Authentication-None - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

address authentication-none

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
Syntax
authentication-none
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that no authentication is to be used for the OSPF interface. The no version
Description
has no effect.
NOTE: You must issue the address area command before issuing this command.
Options
Router Configuration
Mode
ipAddress OSPF interface address previously specified with the address
command
unnumbered Indicates that OSPF is running on an unnumbered interface
previously specified with the address command
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
Chapter 2: A Commands
address authentication-none
91