Authorization - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

authorization

authorization { exec | commands level } authorListName
Syntax
no authorization {exec | commands level }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables AAA authorization for a specified vty line or group of vty lines. Associates
Description
the authorization list with the specified line. If the list does not exist or is empty,
authorization always succeeds. For a command to be authorized, its level must match
exactly with the level of one of the configured lists. The no version disables
authorization.
Options
Line Configuration
Mode
200
authorization
exec Applies this authorization to CLI access in general
commands Applies this authorization to user commands of the specified
privilege level
level—Privilege level; a number in the range 0–15
authorListName—Name of an authorization method list of up to 32 characters;
if no methods list is specified, the default is used