Area-Authentication-Key - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

area-authentication-key

area-authentication-key [ 0 | 8 ] authKey
Syntax
no area-authentication-key
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns a password used by neighboring routers for authentication of IS-IS level 1
Description
LSPs, CSNPs, and PSNPs. The no version deletes the password.
NOTE: Issuing this command enables simple authentication of level 1 LSPs only. To
enable authentication of level 1 CSNPs or PSNPs, use the area-authentication
command.
Options
Router Configuration
Mode
126
area-authentication-key
0 Indicates the authKey is entered in unencrypted form (plaintext); this is the
default option
8 Indicates the authKey is entered in encrypted form (ciphertext)
authKey Password, string of up to 8 characters