Atm - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

atm

atm { ubr | ubrpcr pcr | nrtvbr pcr scr mbs | rtvbr pcr scr mbs | cbr pcr }
Syntax
no atm
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures traffic-shaping parameters for PPPoA via domain-based parameters. The
Description
no version removes the ATM traffic-shaping configuration.
Options
Domain Map Configuration
Mode
ubr Sets the traffic category to unspecified bit rate
ubrpcr Sets the traffic category to unspecified bit rate with peak cell rate
nrtvbr Sets the traffic category to non–real time variable bit rate
rtvbr Set the traffic category to real time variable bit rate
cbr Sets the traffic category to constant bit rate
pcr—Peak cell rate in the range 0–4294967295 Kbps
scr—Sustained cell rate in the range 0–4294967295 Kbps
mbs Maximum burst size in the range 0–4294967295 Kbps
Chapter 2: A Commands
147
atm