Clear Ipv6 Routes - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

clear ipv6 routes

clear ipv6 routes [ ipv6Prefix | * ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Clears IPv6 routes. To clear the routes for a specific IPv6 network, specify the IPv6
Description
prefix. To clear all dynamic IPv6 routes, use the * (asterisk) option. There is no no
version.
Options
Privileged Exec
Mode
ipv6Prefix IPv6 network for which to clear route information
* Clears all dynamic IPv6 routes
Chapter 4: C Commands
417
clear ipv6 routes