Bgp Graceful-Restart Path-Selection-Defer-Time-Limit - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 3: B Commands

bgp graceful-restart path-selection-defer-time-limit

bgp graceful-restart path-selection-defer-time-limit seconds
Syntax
no bgp graceful-restart path-selection-defer-time-limit [ seconds ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the maximum time period after a peer session restart during which the best-path
Description
selection process is deferred. The period is measured from when the session is
detected in a down state. The no version restores the default value, 360 seconds.
seconds Integer in the range 1–3600; default value is 600 seconds
Options
Router Configuration
Mode
291
bgp graceful-restart path-selection-defer-time-limit