Area-Authentication - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

area-authentication

[ no ] area-authentication { csnp | psnp }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables or disables (suppresses) simple text authentication or HMAC MD5
Description
authentication of IS-IS level 1 CSNP packets or PSNP packets. The no version restores
the default behavior, in which authentication of IS-IS level 1 CSNPs and PSNPs is
disabled.
Options
Router Configuration
Mode
csnp Enables authentication of IS-IS level 1 complete sequence number PDUs
(CSNPs)
psnp Enables authentication of IS-IS level 1 partial sequence number PDUs
(PSNPs)
Chapter 2: A Commands
125
area-authentication