Cache Timeout - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

cache timeout

cache timeout { active activeTimer | inactive inactiveTimer }
Syntax
no cache timeout
Command introduced in JUNOSe Release 8.1.0.
Release Information
Sets the active and inactive aging timers. The no version resets the default values.
Description
Options
Flow Cache Configuration
Mode
activeTimer Active aging timer in the range 1 60
inactiveTimer Inactive aging timer in the range 10 600
Chapter 4: C Commands
349
cache timeout