Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual page 759

ip
ip { permit | deny }
Syntax
no ip
Command introduced before JUNOSe Release 7.1.0.
Release Information
Modifies the subscriber policy for IP to define whether the subscriber (client) interfaces
Description
that belong to a bridge group or to a VPLS instance forward (permit) or filter (deny)
IP packets. The no version restores the default value, permit IP packets.
You cannot change the default subscriber policy values for trunk (server) interfaces
that belong to a bridge group or to a VPLS instance. You also cannot change the
default subscriber policy values for a VPLS virtual core interface, which acts as a
trunk interface. The VPLS virtual core interface represents all of the MPLS tunnels
from the router to the remote VPLS edge (VE) devices.
Options
Subscriber Policy Configuration
Mode
permit Specifies that the subscriber interface associated with the bridge group
or VPLS instance forwards IP packets
deny Specifies that the subscriber interface associated with the bridge group
or VPLS instance filters IP packets
Chapter 10: I Commands
717
ip