Ip Flow-Sampling-Mode Packet-Interval - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ip flow-sampling-mode packet-interval

ip flow-sampling-mode packet-interval intervalValue
Syntax
no ip flow-sampling-mode packet-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines the sampling interval for an interface that is running J-Flow. Even though
Description
each flow is sampled, the flow sample is not necessarily cached because of system
constraints. The no version returns the sampling interval to the default value.
NOTE: For interfaces on the ES2 10G LM with either the ES2-S1 GE-8 IOA or the
ES2-S2 10GE PR IOA on E120 routers and E320 routers, J-Flow adjusts the maximum
sampling interval to 8,388,608 (decimal equivalent of 0x800000) and changes the
sampling interval to the closest integer that is a power of two and that is less than
or equal to the configured value.
Options
Global Configuration
Mode
786
ip flow-sampling-mode packet-interval
intervalValue Sampling interval, in the range 1–4000000000 packets; default
value is 4000000000