Clear Rsvp Authentication - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

clear rsvp authentication

clear { ip | mpls } rsvp authentication [ ipAddress ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Clears the security association and resets the sequence number on the receiving peer
Description
for the specified sending peer. There is no no version.
Options
Privileged Exec
Mode
ip Specifies keyword for compatibility with non–E Series implementations
mpls Indicates JUNOSe MPLS implementation
ipAddress IP address of sending peer
Chapter 4: C Commands
clear rsvp authentication
429