Ip Pim - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ip pim

In Interface Configuration mode:
Syntax
[ no ] ip pim [ dense-mode | sparse-mode | sparse-dense-mode ]
In Profile Configuration mode:
[ no ] ip pim [ sparse-mode | sparse-dense-mode ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Profile Configuration mode added in JUNOSe Release 8.2.0.
In Interface Configuration mode, enables PIM on an interface. In Profile Configuration
Description
mode, enables a PIM interface for a dynamic profile. The no version disables PIM
on an interface.
Options
Interface Configuration, Profile Configuration
Mode
876
ip pim
dense-mode Enables PIM in dense mode
sparse-mode Enables PIM in sparse mode
sparse-dense-mode Enables PIM in sparse-dense mode