Baseline Ip Dvmrp - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 3: B Commands

baseline ip dvmrp

baseline ip dvmrp
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a baseline for DVMRP statistics. The router implements the baseline by reading
Description
and storing the statistics at the time the baseline is set and then subtracting this
baseline whenever baseline-relative statistics are retrieved. There is no no version.
Privileged Exec
Mode
233
baseline ip dvmrp