Ip Ignore-Df-Bit - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 10: I Commands

ip ignore-df-bit

[ no ] ip ignore-df-bit
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that the router ignores the don't-fragment bit if present in the IP header of
Description
packets crossing the configured interface; the router then fragments packets even if
the bit is present. The no version restores the default behavior, which is to consider
the DF bit before fragmenting.
Interface Configuration, Profile Configuration
Mode
823
ip ignore-df-bit