Authorization Change - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 2: A Commands

authorization change

[ no ] authorization change
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables the router to receive change-of-authorization messages, such as packet
Description
mirroring attributes and Service Manager attributes, from the RADIUS server. The
no version restores the default, in which support for RADIUS-initiated
change-of-authorization messages is disabled on the router.
RADIUS Configuration
Mode
Configuring RADIUS-Based Mirroring
Related Topics
201
authorization change