Aaa Parse-Direction - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

aaa parse-direction

aaa parse-direction { domainName | realmName } { left-to-right | right-to-left }
Syntax
no aaa parse-direction { domainName | realmName }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the direction the router uses for domain and realm parsing. The router
Description
either searches from right-to-left, or from left-to-right. If searching for the realm, the
router uses the realm delimiter valued in its search. If searching for the domain, it
uses the domain delimiter values in its search. The no version returns the parse
direction to the default setting.
Options
Global Configuration
Mode
domainName Specifies that the domain name is parsed. The router performs
domain searches from right-to-left by default.
realmName Specifies that the realm name is parsed. The router performs realm
searches from left-to-right by default.
left-to-right Causes the router to search from the left-most character. When the
router reaches a realm delimiter, it uses anything to the left of the delimiter as
the domain. When the router reaches a domain delimiter, it uses anything to
the right of the delimiter as the domain.
right-to-left Causes the router to search from the right-most character. When
the router reaches a realm delimiter, it uses anything to the left of the delimiter
as the domain. When the router reaches a domain delimiter, it uses anything to
the right of the delimiter as the domain.
Chapter 2: A Commands
51
aaa parse-direction