Diag-Level - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

diag-level

diag-level [ normal ] [ bypass ]
Syntax
Command introduced in JUNOSe Release 9.2.0.
Release Information
Sets the diagnostics level on the active or standby SRP module to reduce boot time
Description
during a cold and a warm boot. The default diagnostics level is normal. There is no
no version.
Options
Global Configuration
Mode
normal executes full diagnostics on the boot of the line card
bypass skips diagnostic tests on the boot of the line card
Chapter 5: D Commands
515
diag-level