Complete Software Guide for Junos
show pim join
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
2496
®
OS for EX Series Ethernet Switches, Release 10.3
show pim join
<brief | detail | extensive>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
<range>
show pim join
<brief | detail | extensive>
<inet | inet6>
<instance instance-name>
<range>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
and
options introduced in Junos OS Release 10.0 for EX Series switches.
inet6
instance
Display information about Protocol Independent Multicast (PIM) groups.
—Display the standard information about PIM groups for all supported family
none
addresses for all routing instances.
brief | detail | extensive
—(Optional) Display the specified level of output.
—(Optional) Display PIM group information for IPv4 or IPv6 family addresses,
inet | inet6
respectively.
instance instance-name
—(Optional) Display information about groups for the specified
PIM-enabled routing instance only.
logical-system (all | logical-system-name)
systems or on a particular logical system.
range
—(Optional) Address range of the group, specified as
view
clear pim join on page 2434
show pim join on page 2498
show pim join instance on page 2498
show pim join detail on page 2499
show pim join extensive on page 2499
show pim join instance extensive on page 2500
Table 327 on page 2497 describes the output fields for the
fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
prefix/prefix-length
show pim join
Copyright © 2010, Juniper Networks, Inc.
.
command. Output