Specifications - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Specifications

Specifications
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
3-4
Table 3-2 Back Panel Indicators (continued)
Indicator
4FE Card
LINK/activity
100 Mbps
Table 3-3 lists the specifications for the IDS-4215.
Table 3-3 IDS-4215 Specifications
Dimensions and Weight
Height
Width
Depth
Weight
Form factor
Expansion
Power
Autoswitching
Frequency
Operating current
Steady state
Maximum peak
Maximum heat dissipation
Description
—
Lights up when the port is connected to another
operational Ethernet port but no traffic is being passed
between them; blinks off when Ethernet packets are being
received.
Lights up when the port is running in 100-Mbps mode;
off when the port is running in 10-Mbps mode.
1.72 in. (4.37 cm)
16.8 in. (42.72 cm)
11.8 in. (29.97 cm)
11.5 lb (4.11 kg)
1 RU, standard 19-inch rack-mountable
Two 32-bit/33-MHz PCI slots
100V to 240V AC
50 to 60 Hz, single phase
1.5 A
50W
65W
410 BTU/hr, full power usage (65W)
Chapter 3 Installing the IDS-4215
78-15597-02