Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 153

Note
Specifications
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
Installing the NM-CIDS
This chapter lists the software and hardware requirements of the NM-CIDS, and
describes how to install and remove it.
In Cisco IOS documentation, the NM-CIDS is referred to as the Cisco IDS
network module.
This chapter contains the following sections:
Specifications, page 7-1
•
• Software and Hardware Requirements, page 7-2
Front Panel Features, page 7-5
•
Installation and Removal Instructions, page 7-6
•
Table 7-1 lists the specifications for the NM-CIDS.
Table 7-1 NM-CIDS Specifications
Specification
Dimensions (H x W x D)
Weight
Operating temperature
C H A P T E R
Description
1.55 x 7.10 x 7.2 in. (3.9 x 18.0 x 19.3 cm)
1.5 lb (0.7 kg) (maximum)
32° to 104°F (0° to 40°C)
7
7-1