Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 408

Troubleshooting the 4200 Series Appliance
See
To adjust the logging level for a particular zone:
Step 13
sensor(config-Logger)# zoneControl zoneName csi
sensor(config-Logger-zon)#
csi now appears as a zone name.
sensor(config-Logger)# show setttings IdsEventStore
-----------------------------------------------
Enter the submode for a specific zone, for example, the EventStore:
Step 14
sensor(config-Logger)# zoneControl zoneName IdsEventStore
Step 15 Turn on debugging for the EventStore:
sensor(config-Logger-zon)# severity debug
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
B-30
-----------------------------------------------
zoneName: AuthenticationApp default: Cid
severity: warning default: debug
-----------------------------------------------
zoneName: Cli default: Cid
severity: warning default: debug
-----------------------------------------------
zoneName: ctlTransSource default: Cid
severity: warning default: debug
-----------------------------------------------
zoneName: IdapiCtlTrans default: Cid
severity: warning default: debug
-----------------------------------------------
zoneName: IdsEventStore default: Cid
severity: warning default: debug
-----------------------------------------------
zoneName: MpInstaller default: Cid
severity: warning default: debug
-----------------------------------------------
zoneName: tls default: Cid
severity: warning default: debug
-----------------------------------------------
-----------------------------------------------
Zone Names, page B-31, for a list of what each zone name refers to.
zoneName: csi default: Cid
severity: warning default: debug
-----------------------------------------------
-----------------------------------------------
Appendix B Troubleshooting
78-15597-02