Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 223

Chapter 10 Configuring the Sensor Using the CLI
Sensor Administrative Tasks
ipAddress 10.89.146.110
defaultGateway 10.89.146.254
hostname firesafe
telnetOption enabled
accessList ipAddress 10.0.0.0 netmask 255.0.0.0
accessList ipAddress 10.89.0.0 netmask 255.255.0.0
accessList ipAddress 10.16.0.0 netmask 255.255.0.0
accessList ipAddress 10.89.149.31 netmask 255.255.255.255
exit
optionalAutoUpgrade
active-selection none
exit
timeParams
timeParams
summerTimeParams
active-selection recurringParams
recurringParams
summerTimeZoneName CST
exit
exit
ntpServers ipAddress 10.89.147.99
keyId 2
keyValue test
exit
exit
exit
! ------------------------------
service Logger
masterControl
enable-debug false
exit
zoneControl zoneName Cid
severity debug
exit
zoneControl zoneName AuthenticationApp
severity warning
exit
zoneControl zoneName Cli
--MORE--
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
10-27
78-15597-02