Applying For A Cisco.com Account With Cryptographic Access - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Chapter 9 Obtaining Software
Step 5
Step 6
Step 7
Step 8
Applying for a Cisco.com Account with
Cryptographic Access
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
A blue screen is displayed for several minutes without any status
Note
messages while the files are being copied from the CD to your appliance.
Log in to the appliance by using a serial connection or with a monitor and
keyboard.
The default username and password are both cisco.
Note
You are prompted to change the default password.
Passwords must be at least eight characters long and be strong, that is, not
Note
be a dictionary word.
After you change the password, the
Type the setup command to initialize the appliance.
See Initializing the Sensor, page
Install the most recent service pack and signature update.
See Obtaining Cisco IDS Software, page
To download software updates, you must have a Cisco.com account with
cryptographic access.

Applying for a Cisco.com Account with Cryptographic Access

prompt appears.
sensor#
10-2, for the procedure.
9-1, for the procedure.
9-11