Front-Panel Features And Indicators - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Front-Panel Features and Indicators

Note
Note
Front-Panel Features and Indicators
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
5-2
The 500-Mbps performance for the IDS-4250 is based on the following
conditions: 2700 new TCP connections per second, 2700 HTTP transactions per
second, average packet size of 595 bytes, system running Cisco IDS 4.1 sensor
software.
Or you can order the IDS-4250-XL with the XL card already installed. At 1 Gbps,
the IDS 4250-XL provides customized hardware acceleration to protect fully
saturated gigabit links as well as multiple partially utilized gigabit subnets.
The 1000-Mbps performance for the IDS-4250-XL is based on the following
conditions: 5000 new TCP connections per second, 5000 HTTP transactions per
second, average packet size of 595 bytes, system running Cisco IDS 4.1 sensor
software.
This chapter describes the IDS-4235 and IDS-4250 and how to install them. It also
describes the accessories and how to install them.
This chapter contains the following sections:
Front-Panel Features and Indicators, page 5-2
•
• Back-Panel Features and Indicators, page 5-4
• Specifications, page 5-5
Installing Spare Hard-Disk Drives, page 5-6
•
• Upgrading the BIOS, page 5-7
Using the TCP Reset Interface, page 5-8
•
Installing the IDS-4235 and IDS-4250, page 5-9
•
• Installing the Accessories, page 5-11
Figure 5-1 on page 5-3
behind the bezel on the front panel of the IDS-4235 and IDS-4250.
Chapter 5
shows the controls, indicators, and connectors located
Installing the IDS-4235 and IDS-4250
78-15597-02