Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 189

Chapter 9 Obtaining Software
Table 9-2 Platform-Dependent Release Examples
Target
Release Frequency
1
System image Semi-annually sys
Application Semi-annually a
partition
2
image
Maintenance Annually
partition
3
image
Full image for Semi-annually r
recovery
partition
(IDS/IPS
appliances
4
only)
5
Boot loader As needed
6
Helper image As needed
Recovery and Annually
7
upgrade CD
1. The system image includes the combined recovery and application image used to reimage an entire sensor.
2. The application partition image includes the full image for the application partition.
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
Table 9-2 describes the platform-dependent release examples.
Identifier
mp
bl
helper
cd
Supported
Platform Example File Name
IDS-4215 IPS-4240-K9-sys-1.1-a-4.0-1-S29.img
IPS-4240
IPS-4255
IDSM-2 WS-SVC-IDSM2-K9-a-4.0-1-S29.bin.gz
NM-CIDS NM-CIDS-K9-a-4.1-1-S29.bin.gz
IDSM-2 only mp-2-1-1.bin.gz
IDS-4210 IDS-42XX-K9-r-1.1-a-4.0-1-S29.tar.pkg
IDS-4220
IDS-4230
IDS-4235
IDS-4250
IDS-4215 IDS-4215-K9-r-1.1-a-4.1-1-S29.tar.pkg
IPS-4240 IPS-4240-K9-r-1.1-a-4.1.1-S29.tar.pkg
IPS-4255
NM-CIDS servicesengine-bl-1.0-4.bin
NM-CIDS NM-CIDS-K9-helper-1.0-1.bin
IDS-4210 IDS-42XX-K9-cd-1.1-a-4.0-1-S29.iso
IDS-4220
IDS-4230
IDS-4235
IDS-4250
IDS Software Versioning
9-7