Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 48

Front Panel Features and Indicators
Figure 2-1 Front Panel Features
LAN 1 activity/link
System fault indictor
Power indicator
Hard-disk drive
activity indicator
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
2-2
indicator
LAN 2 activity/link
indicator
1
2
Table 2-1 describes the appearance and function of the front panel indicators.
Table 2-1 Front Panel Indicators
Indicator
Power
System fault
Hard-disk drive activity Green
LAN1 activity/link
LAN2 activity/link
Color Function
Green Lights up when the system is connected to
an AC power source; blinks when the
system is in sleep mode.
Amber Blinks during system startup or when a
system fault is detected.
Blinks when hard-disk drive activity
occurs.
Amber Lights up when the LAN1 connector is
linked to an Ethernet port; blinks when
activity occurs on this channel.
Amber Lights up when the LAN2 connector is
linked to an Ethernet port; blinks when
activity occurs on this channel.
Chapter 2 Installing the IDS-4210
78-15597-02