Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 63

Chapter 3 Installing the IDS-4215
Figure 3-2 IDS-4215 Back Panel Features
Empty PCI
slot
int2
int3
int4
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
Figure 3-2 shows the back view of the IDS-4215.
10/100 ETHERNET 0
int5 int0
The built-in Ethernet ports have three indicators per port and the 4FE card has two
indicators per port. Figure 3-3
Figure 3-3 IDS-4215
Indicators
Table 3-2 lists the back panel indicators.
Table 3-2 Back Panel Indicators
Indicator
Built-in Ethernet
100 Mbps
Link
ACT
USB
(unused)
10/100 ETHERNET 1
USB CONSOLE
int1 Off/on
Console
shows the back panel indicators.
Indicators
100Mbps ACT
10/100 ETHERNET 0
Description
—
Lights up when the port is running in 100-Mbps mode;
off when it is running in 10-Mbps mode.
Lights up when the port is connected to another Ethernet
port and traffic can be passed between them.
Blinks when network traffic is being received on the port.
Front and Back Panel Features
Power
connector
LINK 100Mbps ACT LINK
10/100 ETHERNET 1
USB CONSOLE
3-3