Hardware Specifications - Cisco PC4000 Installation Manual

Overview
Description
Maximum AC input current
Maximum input volt amperes
Maximum output power for each power supply
Maximum inrush current
Maximum hold-up time
Power supply output voltage
Power supply standby voltage
Efficiency rating
Form factor
Input connector

Hardware Specifications

The following table lists the hardware specifications for the Secure Endpoint PC4000.
Table 3: Secure Endpoint PC4000 Hardware Specifications
Specification
Dimensions (H x W x D)
Maximum weight (fully loaded chassis)
Temperature
Relative humidity
Altitude
Sound power level
Specification
12.5 A peak at 100 V AC
6.0 A peak at 208 V AC
1250 VA at 100 V AC
1050 W
15 A (subcycle duration)
12 ms at 1050 W
12 V DC
12 V DC
Climate Savers Platinum Efficiency (80 Plus Platinum
certified)
RSP2
IEC320 C14
3.4 x 16.9 x 29.5 in. (8.64 x 42.9 x 74.0 cm)
57.5 lb (26.1 kg)
Operating: 50 to 95°F (10 to 35°C)
Maximum temperature is derated by 1°F/547 ft (1°C/300 m) of altitude abov
Nonoperating: –40 to 149°F (–40 to 65°C) when the appliance is stored or tr
Operating: 8 to 90% noncondensing
Nonoperating: 5 to 95% noncondensing
Operating: 0 to 10,000 ft
Nonoperating: 0 to 40,000 ft when the appliance is stored or transported
5.8 Bels (measure A-weighted per ISO7779 LWAd)
Operation at 73°F (23°C)
Cisco Secure Endpoint PC4000 Hardware Installation Guide
Hardware Specifications
11