Front And Back Panel Features - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Front and Back Panel Features

Note
Note
Front and Back Panel Features
Note
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
6-2
The 600-Mbps performance for the IPS-4255 is based on the following
conditions: 6000 new TCP connections per second, 6000 HTTP transactions per
second, average packet size of 445 bytes, system running Cisco IDS 4.1 sensor
software. The 600-Mbps performance is traffic combined from all four sniffing
interfaces.
The IPS-4240 and the IPS-4255 do not support redundant power supplies.
This chapter describes the IPS-4240 and the IPS-4255 and how to install them. It
also describes the accessories and how to install them.
This chapter contains the following topics:
Front and Back Panel Features, page 6-2
•
• Specifications, page 6-5
Accessories, page 6-6
•
• Rack Mounting, page 6-7
Installing the IPS-4240 and IPS-4255, page 6-9
•
This section describes the IPS-4240 and IPS-4255 front and back panel features
and indicators.
Although the graphics show the IPS-4240, the IPS-4255 has the same front and
back panel features and indicators.
Chapter 6 Installing the IPS-4240 and IPS-4255
78-15597-02