Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 101

Chapter 5 Installing the IDS-4235 and IDS-4250
Figure 5-1 Front-Panel Features and Indicators
status indicator
(Not used)
(blue and amber)
Keyboard connector
Identification button
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
1
2
System
CD drive
NIC1 indicator
1
2
Power button
The power button controls the AC power input to the appliance's power supplies.
You can use the identification buttons on the front and back panels to locate a
particular appliance in a rack. When you push one of these buttons, the blue
system status indicator on the front and back blinks until you push one of the
buttons again.
The front panel also has a video connector for connecting a monitor and a PS/2
connector for connecting a keyboard.
Table 5-1 on page 5-4
the IDS-4235 and IDS-4250.
Hard drive
NIC2 indicator
Hard drive indicator
Latch for
System door
Video connector
describes the appearance of the front panel indicators for
Front-Panel Features and Indicators
Diskette drive
5-3