Displaying Statistics - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Gathering Information
Note

Displaying Statistics

Step 1
Step 2
Step 3
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
B-62
NetworkAccess
•
• TransactionSource
TransactionServer
•
• WebServer
You can get the same information from IDS Device Manager by selecting
Monitoring > Statistics.
You can use the show statistics command to display the statistics of the service
you are interested in.
To display the statistics of the service you are interested in, follow these steps:
Log in to the CLI.
View the services that you can display statistics on:
sensor# show statistics ?
Authentication
EventServer
EventStore
Host
Logger
NetworkAccess
TransactionServer
TransactionSource
WebServer
Show the statistics of the service you are interested in:
sensor# show statistics {
Logger | NetworkAccess | TransactionServer | TransactionSource | WebServer }
[ clear ]
For example, here are statistics for the EventStore:
sensor# show statistics EventStore
Event store statistics
General information about the event store
The current number of open subscriptions = 0
Display authentication statistics
Display event server statistics
Display event store statistics
Display host statistics
Display logger statistics
Display network access controller statistics
Display transaction server statistics
Display transaction source statistics
Display web server statistics
Authentication | EventServer | EventStore | Host |
Appendix B Troubleshooting
78-15597-02