Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 148

Rack Mounting
Note
Use the supplied screws to attach the appliance to the equipment rack.
Step 2
To remove the appliance from the rack, remove the screws that attach the
Step 3
appliance to the rack, and then remove the appliance.
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
6-8
The bottom hole in the bracket is a banana jack you can use for ESD
grounding purposes when you are servicing the system. You can use the
two threaded holes to mount a ground lug to ground the chassis.
Chapter 6 Installing the IPS-4240 and IPS-4255
Ci sc o
A SA 42
PW R ST
40
AT US
Int ru sio
n De tec
tio n Se
FL AS H
ns or
78-15597-02