Show Version Command - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Gathering Information

show version Command

Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
B-56
! ———————————————
service Logger
masterControl
enable-debug false
exit
zoneControl zoneName Cid severity debug exit zoneControl zoneName
AuthenticationApp
severity warning
exit
zoneControl zoneName Cli
severity warning
exit
zoneControl zoneName ctlTransSource
severity warning
exit
zoneControl zoneName IdapiCtlTrans
severity warning
exit
zoneControl zoneName IdsEventStore
severity warning
exit
zoneControl zoneName MpInstaller
severity warning
exit
zoneControl zoneName tls
severity warning
exit
exit
! ———————————————
The show version command is useful for establishing the general health of the
sensor.
This section contains the following topics:
show version Command, page B-57
•
Displaying the Current Version, page B-57
•
Appendix B Troubleshooting
78-15597-02