Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 84

Removing and Replacing the Compact Flash Device
Press until the compact flash device is fully seated in the connector.
Step 3
Replace the hard-disk drive.
Step 4
See
Replace the chassis cover.
Step 5
See
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
3-24
Replacing the Hard-Disk Drive, page
Replacing the Chassis Cover, page
Chapter 3
Compact Flash
memory card
3-20, for the procedure.
3-15, for the procedure.
Installing the IDS-4215
78-15597-02