Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 303

Chapter 10 Configuring the Sensor Using the CLI
•
•
•
•
•
•
•
•
•
•
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
session slot slot_number processor processor_number
Logs in to the console of the IDSM-2 from the switch console.
show intrusion-detection module module_number data-port
data_port_number state
Displays the state of the specified IDSM-2 data port.
show intrusion-detection module module_number data-port
data_port_number traffic
Displays traffic statistics for the IDSM-2 data port traffic.
show intrusion-detection module module_number management-port state
Displays the state of the IDSM-2 management port.
show intrusion-detection module module_number management-port
traffic
Displays traffic statistics for the IDSM-2 management port.
show ip access-lists
Displays the current access lists.
show module
Displays the installed modules, versions, and states.
show running-config
Displays the configuration that is currently running.
show startup-config
Displays the saved configuration.
show vlan access-map
Displays all current VLAN access maps.
IDSM-2 Configuration Tasks
10-107