Accessories - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Chapter 3 Installing the IDS-4215
Note

Accessories

Warning
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
Table 3-3 IDS-4215 Specifications (continued)
Environment
Temperature
Relative humidity
Altitude
Shock
Vibration
Acoustic noise
Only one PCI expansion slot can be used for the 4FE card. We recommend you
install the 4FE card in the lower PCI expansion slot.
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that
accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Operating +41°F to +104°F (+5°C to +40°C)
Nonoperating -13°F to +158°F (-25°C to +70°C)
Operating 5% to 95% (noncondensing)
Nonoperating 5% to 95% (noncondensing)
Operating 0 to 9843 ft (3000 m)
Nonoperating 0 to 15,000 ft (4750 m)
Operating 1.14 m/sec (45 in./sec) 1/2 sine input
Nonoperating 30 G
0.41 Grms2 (3-500 Hz) random input
54 dBa maximum
Accessories
3-5