Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 150

Installing the IPS-4240 and IPS-4255
Note
Connect the RJ-45 connector to the console port and connect the other end to the
Step 5
DB-9 or DB-25 connector on your computer.
Step 6 Attach the network cables.
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
6-10
You can use a 180/rollover or straight-through patch cable to connect the
appliance to a port on a terminal server with RJ-45 or hydra cable
assembly connections. Connect the appropriate cable from the console
port on the appliance to a port on the terminal server. See
Terminal Server, page
server.
FLASH
Console
port (RJ-45)
RJ-45 to
DB-9 or DB-25
serial cable
(null-modem)
Chapter 6 Installing the IPS-4240 and IPS-4255
1-9, for the instructions for setting up a terminal
Setting Up a
Computer serial port
DB-9 or DB-25
78-15597-02