Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 97

Chapter 4 Installing the IDS-4220 and IDS-4230
Use the dual serial communication cable (PN 72-1847-01, included in the
Step 3
accessory kit) to attach a laptop to the COM1 port of the appliance (see
for a list of the terminal settings), or connect a keyboard and monitor to the
appliance.
Table 4-4
Terminal
Bits per second
Data bits
Parity
Stop bits
Flow control
Caution We recommend that you use the dual serial communication cable (PN
72-1847-01, included in the accessory kit) rather than a keyboard and monitor,
because some keyboards and monitors are incompatible with the appliance. See
Recommended Keyboards and Monitors, page
monitors and keyboards.
Note
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
Terminal Settings
Setting
9600
8
None
1
Hardware or RTS/CTS
You can use a 180/rollover or straight-through patch cable to connect the
appliance to a port on a terminal server with RJ-45 or hydra cable
assembly connections. Use a M.A.S.H adapter (part number 29-4077-02)
to connect the appropriate cable to a port on the terminal server. See
Setting Up a Terminal Server, page
a terminal server.
Installing the IDS-4220 and IDS-4230
4-4, for a list of compatible
1-9, for the instructions for setting up
Table 4-4
4-7