Accessories - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Accessories

Accessories
Warning
Warning
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
6-6
Table 6-3 IPS-4240/IPS-4255 Specifications (continued)
Environment
Temperature
Relative humidity
Altitude
Shock
Vibration
Acoustic noise
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that
accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment. Statement 1030
Chapter 6 Installing the IPS-4240 and IPS-4255
Operating +32°F to +104°F (+0°C to +40°C)
Nonoperating -13°F to +158°F (-25°C to +70°C)
Operating 5% to 95% (noncondensing)
Nonoperating 5% to 95% (noncondensing)
Operating 0 to 9843 ft (3000 m)
Nonoperating 0 to 15,000 ft (4750 m)
Operating 1.14 m/sec (45 in./sec) ½ sine input
Nonoperating 30 G
0.41 Grms2 (3 to 500 Hz) random input
54 dBa (maximum)
78-15597-02