Installing The Idsm-2; Specifications - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Specifications

Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02

Installing the IDSM-2

This chapter lists the software and hardware requirements of the IDSM-2, and
describes how to remove and install it.
This chapter contains the following sections:
Specifications, page 8-1
•
Software and Hardware Requirements, page 8-2
•
Supported IDSM-2 Configurations, page 8-3
•
Front Panel Description, page 8-4
•
• Installation and Removal Instructions, page 8-5
Table 8-1 lists the specifications for the IDSM-2.
Table 8-1 IDSM-2 Specifications
Specification
Dimensions (H x W x D)
Weight
Operating temperature
C H A P T E R
Description
1.18 x 15.51 x 16.34 in (30 x 394 x 415 mm)
Minimum: 3 lb (1.36 kg)
Maximum: 5 lb (2.27 kg)
32° to 104°F (0° to 40°C)
8
8-1