Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual page 230

Sensor Administrative Tasks
Clear the statistics:
Step 4
Note
sensor# show statistics EventStore clear
Event store statistics
The next time you want to see the statistics for EventStore, the counters are reset.
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
10-34
The number of queries issued = 0
The number of times the circular buffer has wrapped = 0
Number of events of each type currently stored
Debug events = 0
Status events = 7
Log transaction events = 118
Shun request events = 0
Error events, warning = 44
Error events, error = 0
Error events, fatal = 0
Alert events, informational = 0
Alert events, low = 0
Alert events, medium = 0
Alert events, high = 0
The clear option is not available for Host or NetworkAccess statistics.
General information about the event store
The current number of open subscriptions = 0
The number of events lost by subscriptions and queries = 0
The number of queries issued = 0
The number of times the circular buffer has wrapped = 0
Number of events of each type currently stored
Debug events = 0
Status events = 7
Log transaction events = 119
Shun request events = 0
Error events, warning = 44
Error events, error = 0
Error events, fatal = 0
Alert events, informational = 0
Alert events, low = 0
Alert events, medium = 0
Alert events, high = 0
Chapter 10 Configuring the Sensor Using the CLI
78-15597-02