Chapter 2 Installing The Ids-4210; Front Panel Features And Indicators - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Note
Note

Front Panel Features and Indicators

Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
Installing the IDS-4210
This chapter describes the IDS-4210 and how to install it and its accessories.
IDS-4215 replaces the IDS-4210, which will no longer be sold after July 2003.
If you purchased an IDS-4210 before July 2003, you must upgrade the memory to
256 MB to install Cisco IDS 4.1. See
information. If you purchase an IDS-4210 during July, it comes from the factory
with the memory upgrade and version 4.1 installed.
This chapter contains the following sections:
• Front Panel Features and Indicators, page 2-1
• Upgrading the Memory, page 2-3
Installing the IDS-4210, page 2-5
•
• Installing the Accessories, page 2-8
Figure 2-1 on page 2-2shows the front panel indicators on the IDS-4210.
C H A P T E R
Upgrading the Memory, page 2-3
2
for more
2-1