Software And Hardware Requirements - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Software and Hardware Requirements

Software and Hardware Requirements
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
8-2
Table 8-1 IDSM-2 Specifications (continued)
Specification
Nonoperating temperature
Humidity
The following are the IDSM-2 software and hardware requirements:
Catalyst software release 7.5(1) or later with supervisor engine 1a with
•
MSFC2
Catalyst software release 7.5(1) or later with supervisor engine 2 with
•
MSFC2 or PFC2
Cisco IOS software release 12.2(14)SY with supervisor engine 2 with
•
MSFC2
Cisco IOS software release 12.1(19)E or later with supervisor engine 2 with
•
MSFC2
Cisco IOS software release 12.1(19)E1 or later with supervisor engine 1a
•
with MSFC2
Cisco IOS software release 12.2(14)SX1 with supervisor engine 720
•
Cisco IDS software release 4.0 or later
•
• Any Catalyst 6500 series switch chassis or 7600 router
Chapter 8
Description
–40° to 167°F (–40° to 75°C)
10% to 90%, noncondensing
Installing the IDSM-2
78-15597-02