Displaying And Clearing Statistics - Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet Sensor Installation And Configuration Manual

Chapter 10 Configuring the Sensor Using the CLI

Displaying and Clearing Statistics

Step 1
Step 2
Step 3
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
Type the password for this user account.
b.
The
Generating report:
You can use the show statistics command to display the statistics of the service
you are interested in. You can use the clear option to clear the statistics.
To display and clear the statistics of the service you are interested in, follow these
steps:
Log in to the CLI.
View the optional parameters of the show statistics command:
sensor# show statistics
Authentication
EventServer
EventStore
Host
Logger
NetworkAccess
TransactionServer
TransactionSource
WebServer
Note The clear option is not available for Host or NetworkAccess statistics.
Show the statistics of the service you are interested in:
sensor# show statistics {
Logger | NetworkAccess | TransactionServer | TransactionSource | WebServer }
[ clear ]
For example, here are the statistics for the EventStore:
sensor# show statistics EventStore
Event store statistics
General information about the event store
The current number of open subscriptions = 0
The number of events lost by subscriptions and queries = 0
message is displayed.
Display authentication statistics
Display event server statistics
Display event store statistics
Display host statistics
Display logger statistics
Display network access controller statistics
Display transaction server statistics
Display transaction source statistics
Display web server statistics
Authentication | EventServer | EventStore | Host |
Sensor Administrative Tasks
10-33